touch screen repairs

DIY Steps For Touch Screen Repairs

The use of smartphones has been on the rise over time. One of the greatest risks of using such devices is the possibility of breaking their touchscreen. Such a situation can bring a significant setback to your daily activities. So, the problem needs immediate repair to avoid affecting you to a great extent. This article provides detailed touch screen repairs process to consider.

Fixing the phone all by yourself is not a big deal. The process starts with identifying a replacement screen from a reliable vendor. With the presence of a lot of online stores to rely on, one can conveniently find a replacement. Ensure that you are clear about the model of your phone before you make an online purchase. In case you are not sure of the model, it is best to consider buying the replacement from a local store.

You need to include some of the tools required for replacement in your purchase. Most of the online stores have these tools making it easy to access them as well. Necessary tools needed for this process include mini screwdrivers, mini Torx drivers, plastic wedges, a guitar pick, and plastic tweezers. Other items needed for the process are curved tweezers, hair dryer or heating gun and a craft scalpel.

A basic screen replacement process has five steps. It starts with opening the phone, removing its display, replacing the adhesive, fitting the new display, and ensuring a correct cable connection. Before you begin the process, you should be in a place with enough lighting and ensure that there is enough time to handle the process. Also, find a couple of reference videos to rely on during the procedure.

Remove the rear cover and identify the Torx screws, which are hard to locate. Also, look for additional screws under the labels and besides the USB ports. Use a lever and spectrum to prize the phone away to remove other screws as well. Be careful with the ribbon cables to avoid creating additional damages.

Assuming that you have the front part of your phone at hand, you can now proceed to remove the screen. Soften the adhesive with the heat gun or leave it in a warm place for a while. Push through the camera hole to remove the glass and prize it away from the body. Some displays might require you to remove some of the components to prize the screen.

In the next two steps, you need to not only replace but also install a new one. It is recommendable to apply an adhesive on the body frame rather than on the glass for effectiveness. Once you have used the adhesive, place the new screen on the body, and lightly put pressure on it until it meets the adhesive.

Once it is in position, it is not time to put your phone together. Start by reconnecting all relevant cables and locking them down when needed. Also, replace the screws to their position and check whether it works. Do not put the final screws until you are entirely sure that everything is functional.